- Pre-mix fan-assisted (turbo) burners provide more heat but use 28% less gas than ordinary 4” mixing nozzles. They are also quiet (70 dB(A) at 1m). Full details in brochure.
- Air-cooled insulated top (waterless), seamless and slanted for easy cleaning
- Cast iron rings with two open sides, no exhaust duct required
- One-piece moulded fire brick and cast iron chambered ring fits most woks (recommended wok sizes stated below each model)
- Electronic ignition with CE FSD
- Rear pots heated by main burner exhaust
- Natural gas, LPG or town gas
ECR-1-SE
Shanghai single 14-16″
1 front ring, 1 rear ring, 1 pot
W1400 x D1250 x H810+440
42+5 kW, 380kg
Shanghai single 14-16″
1 front ring, 1 rear ring, 1 pot
W1400 x D1250 x H810+440
42+5 kW, 380kg
ECR-2-SE
Shanghai twin 14-16″
2 front rings, 2 rear rings, 2 pots
W2400 x D1250 x H810+440
(42+5)x2 kW, 660kg
Shanghai twin 14-16″
2 front rings, 2 rear rings, 2 pots
W2400 x D1250 x H810+440
(42+5)x2 kW, 660kg
ECR-1-RE
Shanghai single 14-16″ (reduced depth)
1 front ring, 1 rear ring, 1 pot
W1400 x D1050 x H810+440
42+5 kW, 380kg
Shanghai single 14-16″ (reduced depth)
1 front ring, 1 rear ring, 1 pot
W1400 x D1050 x H810+440
42+5 kW, 380kg
ECR-2-RE
Shanghai twin 14-16″ (reduced depth)
2 front rings, 1 rear ring, 2 pots
W2400 x D1050 x H810+440
42×2 +5 kW, 660kg
Shanghai twin 14-16″ (reduced depth)
2 front rings, 1 rear ring, 2 pots
W2400 x D1050 x H810+440
42×2 +5 kW, 660kg
Warning!
These are large and heavy wok ranges that cannot be disassembled, please ensure they will fit through your doors!
- 16 kW 11″ Punchy burner
- Double skinned insulated layer
- Grease drainage
- Thermocouple flame failure device and electric ignition
- Fully CE approved, Natural Gas and LPG models
- Stainless steel construction
CDR-8E duck roasting oven:
- 6-7 duck capacity with 25-30 min cooking time
- Ø870 x 1500 (H) mm
CDR-9E? duck roasting oven:
- 8-9 duck capacity with 25-30 min cooking time
- Ø 1050 x 1500 (H) mm
Feature a patented insulated heat-exchanger designed to conserve gas and speed heating up. They also have a patented Flue-Tube Independent Fire Jet design burner, which can enhances thermal efficiency (85% compared to 60% for traditional models) and thus saves operational cost. The noise level is less than 65dB(A).
- Low water level control with overheat protection
- Valves to control flow of steam to each compartment as needed
- 2 step rotary door looks to ensure a good seal and prevent scalding
- 9 minute pre-heat time (three deck cabinet model)
- 3 power settings for gas burners
- Drainage valve to prevent limescale
- Pull out shelving secured with latches, on adjustable rails
- Accessible boiler tank for easy cleaning
- Plug-in door gasket for easy replacement
- 39 kW burners fitted (42 kW with LPG)
- Electronic ignition with CE FSD
ESC-1VE
Vertical open (swing door), single deck.
8 pairs of rail rack with layer shelving
W800 x D950 x H1800
Vertical open (swing door), single deck.
8 pairs of rail rack with layer shelving
W800 x D950 x H1800
ESC-2VE
Vertical open (swing door), twin deck.
4 pairs of rail rack for GN 2/1 pan
W800 x D950 x H1800
Vertical open (swing door), twin deck.
4 pairs of rail rack for GN 2/1 pan
W800 x D950 x H1800
Feature a patented insulated heat-exchanger designed to conserve gas and speed heating up. They also have a patented Flue-Tube Independent Fire Jet design burner, which can enhances thermal efficiency (85% compared to 60% for traditional models) and thus saves operational cost. The noise level is less than 65dB(A).
- Low water level control with overheat protection
- 9 minute pre-heat time (three deck cabinet model)
- 3 power settings for gas burners
- Swing spout water tap
- Drainage valve to prevent limescale
- Accessible boiler tank for easy cleaning
- Insulated top
- Removable water drainage cover
- Electronic ignition with CE FSD
- Built-in double rice roll pan (ERS-2E only).
- Dim-sum steamer hole plate and baskets not included, sold separately. Dimensions exclude baskets.